Site Diary › Toolbox talks › Construction vehicles and mobile plant

Construction vehicles toolbox talk

TLBs, tipper trucks, rollers, dumpers and delivery trucks share small sites with people on foot. Drivers have big blind spots, especially when reversing, and a machine can roll into a trench or tip over on a slope. The Construction Regulations set clear duties for who may operate plant, how it is checked and how people and machines are kept apart.

  • Tools and plant
  • About 5 minutes
  • Free PDF with register
Download the PDF Blank register

Two A4 pages: the talk to read out, then an attendance register with 22 numbered rows. Or print this page from your browser.

Say this

Read it out, or put it in your own words. Stop and point at the real thing on this site wherever you can.

1. Only authorised operators

Only a person who is trained, certified competent, authorised in writing and holding a medical certificate of fitness may operate a TLB, roller, dumper or other plant. Nobody else jumps on to move it a little, not even to shift it out of the way. If the key is in it and the operator is gone, leave it.

2. The daily check

Before starting, the operator checks the machine with a checklist and writes the results in the register kept in the vehicle. That includes the brakes, the hooter, the automatic reversing alarm, lights, mirrors, tyres, leaks and the cab protection. A machine with a fault is reported and parked, not used until it is fixed.

3. Blind spots and reversing

If you cannot see the driver's eyes or their mirrors, the driver cannot see you. Never walk behind a reversing truck or TLB, and never rely on the reversing alarm alone, because on a noisy site you stop hearing it. When a truck reverses on site, an appointed signaller guides it from a safe place where the driver can see them. If the driver loses sight of the signaller, the driver stops.

4. Keep people and machines apart

Walk only on the marked walkways and use the pedestrian gate, not the vehicle gate. Stay well clear of a working TLB's swing and bucket. Never stand between a machine and a wall, a stack or another vehicle. Before you approach a machine, catch the operator's eye and wait for a signal.

5. No riders

Nobody rides on a machine except in a proper seat provided for that purpose. Never ride in a bucket, on the steps or on the back of a tipper.

6. Parking up

When a machine is left, the bucket or boom goes down flat on the ground, controls in neutral, engine off, brakes on, wheels chocked where needed and the key taken out. Machines left next to a public road at night need lights or reflectors. Near trenches and drops, edge protection or barriers stop machines going over.

Check on site today

  • Are today's plant operators authorised in writing, with proof of competence and a medical certificate?
  • Has every machine's daily checklist been done and written in its register?
  • Reversing alarms and hooters working on every machine
  • Walkways and vehicle routes marked and separate
  • Is there an appointed signaller for reversing trucks and deliveries?
  • Edge protection or barriers where machines work near trenches or drops

Ask the crew

Open questions get people talking. Listen to the answers: they tell you what's really happening on site.

  • Where are the blind spots on our TLB and the delivery trucks?
  • How do you get an operator's attention safely before you walk up to a machine?
  • Where on this site do people and machines cross paths most?
  • What would you do if you saw someone riding in a bucket?

Protective equipment for this job

  • High-visibility vest or shirt
  • Hard hat
  • Safety boots
  • Hearing protection for operators and people working close to loud plant

What the law says

In our own words. Follow the links for the full wording.

  • Construction Regulations, 2014, regulation 23(1): Construction vehicles and mobile plantConstruction vehicles and mobile plant must be well designed, maintained and used as intended. Operators must be trained, certified competent, authorised in writing and hold a medical certificate of fitness. Movement must be controlled by signalling or similar arrangements, plant must be kept from falling into excavations or water with edge protection, and machines need operator protection against falling material and rollover, an operator-controlled hooter, an automatic reversing alarm, and a daily pre-use inspection by the operator recorded in a register kept in the vehicle.Read on 21 November 2026
  • Construction Regulations, 2014, regulation 23(2): Construction vehicles and mobile plantNobody may ride on a vehicle or plant except in a safe place provided for that purpose. The site must be laid out so that people on foot and vehicles can move safely, with suitable, signed traffic routes. Unattended plant next to public roads or work areas at night needs lights or reflectors, and parked plant must have buckets and booms lowered or blocked, controls in neutral, engine off, wheels chocked, brakes set and ignition secured. Plant on public roads must comply with the National Road Traffic Act.Read on 21 November 2026
  • Construction Regulations, 2014, regulation 1: Definitions ("construction vehicle", "mobile plant")A construction vehicle carries people or material on and off site for construction work. Mobile plant is any machine that moves under its own power and is used for construction work on site, such as a TLB, roller or dumper.Read on 21 November 2026

Sign the register

Everyone who listened signs page 2 of the PDF: name, company or trade, signature. Keep it in the site's health and safety file. How to fill in the register.

This talk is general safety information for South African sites, not legal advice. Your site's risk assessment, safe work procedures and health and safety plan come first. Written 21 November 2026 by Kindly Made from the sources linked above.