Say this
Read it out, or put it in your own words. Stop and point at the real thing on this site wherever you can.
1. What is inside
A gas cylinder is a steel bottle packed with gas under high pressure. LPG and acetylene burn easily. Oxygen does not burn by itself, but it makes everything else burn much harder and faster, even oily gloves and overalls. Never use oxygen to blow dust off your clothes or to 'freshen' the air in a tight space. If a valve is knocked off, the escaping gas can push a cylinder like a rocket.
2. Storing cylinders
Cylinders stand upright, chained or strapped so they cannot fall. They live in a store that is open to fresh air, shaded from the sun, signed, and away from heat, fuel and electrical boards. Keep oxygen apart from LPG and acetylene. Keep full and empty cylinders in separate, marked places, with the valve caps on. Never keep a cylinder inside a site hut, a container or a closed office.
3. Moving cylinders
Close the valve and take off the regulator, or fit the cap, before moving a cylinder. Use a cylinder trolley. Do not roll a cylinder on its side, drop it, or lift it by the valve. On a bakkie, carry it upright and tied down, never loose and never inside the cab with you.
4. Using gas safely
Before you light up, check the hoses for cracks, burns and loose clips, and check the regulator is the right one for that gas. Cutting sets must have flashback arrestors fitted. Test joints for leaks with soapy water, never with a flame. Open valves slowly. Use acetylene cylinders standing up. When you stop for a break or finish, close the cylinder valves, not just the torch.
5. If you smell gas
LPG has a strong smell and leaks often hiss. Close the cylinder valve if you can do it safely. Do not switch lights or tools on or off, and keep all flames and cigarettes away. Move people out and tell your supervisor. If a cylinder is in a fire or getting hot, do not try to be a hero: get everyone well away, sound the alarm and call the fire brigade.
6. Leave the gas installations to the experts
Only an authorised gas person may install or remove a fixed gas system, test it for leaks and issue its certificate. Only an approved testing station may inspect and test cylinders. We do not refill, repair or swap fittings ourselves.
Check on site today
- Check that every cylinder on site is upright and chained or strapped, with caps on spare cylinders.
- Look at the gas store: fresh air, shade, signs, no-smoking notice, and oxygen kept apart from fuel gases.
- Inspect hoses, clips and regulators on cutting sets and torches, and check flashback arrestors are fitted.
- Make sure full and empty cylinders are kept apart and marked.
- Check that no cylinders are kept inside huts, containers or vehicles overnight.
- Confirm a cylinder trolley is available and being used.
Ask the crew
Open questions get people talking. Listen to the answers: they tell you what's really happening on site.
- Why is oxygen dangerous even though it does not burn on its own?
- How do you check a gas hose or joint for a leak?
- What would you do if you smelt gas in the store first thing in the morning?
- How do we carry cylinders on the bakkie, and what have you seen done wrong?
Protective equipment for this job
- Leather gloves when handling cylinders
- Safety boots
- Cutting goggles or face shield and flame-resistant clothing when using oxy-acetylene
What the law says
In our own words. Follow the links for the full wording.
- Pressure Equipment Regulations, 2009, regulation 18: Transportable gas containersGas cylinders may only be used, filled, handled, repaired, inspected or tested in line with the incorporated standards, and inspection and testing must be done by an approved testing station.Read on 21 November 2026
- Pressure Equipment Regulations, 2009, regulation 17: Gas reticulation equipment and systemsGas must be handled, stored and distributed according to the incorporated standard; only an authorised person may install or remove a gas appliance or system; a new or reinstalled system needs an inspection and leak test before use; and a certificate of conformity must be issued after an installation or change.Read on 21 November 2026
- Construction Regulations, 2014, regulation 29: Fire precautions on construction sitesThe contractor must provide sufficient and suitable storage for flammable liquids, solids and gases, ban smoking where flammable materials are kept, and take steps to avoid the risk of fire.Read on 21 November 2026
- General Safety Regulations, 1986, regulation 9: Welding, flame cutting, soldering and similar operationsNo one may do welding or flame cutting unless they have been fully instructed in the safe use of the equipment and its hazards, and the right protective equipment is provided and used.Read on 21 November 2026
Sign the register
Everyone who listened signs page 2 of the PDF: name, company or trade, signature. Keep it in the site's health and safety file. How to fill in the register.
Free from sitediary.co.za/toolbox-talks/gas-cylinders/. The attendance register is page 2 of the PDF, or sitediary.co.za/toolbox-talks/attendance-register/. General safety information, not legal advice: follow your site's risk assessment and health and safety plan.
This talk is general safety information for South African sites, not legal advice. Your site's risk assessment, safe work procedures and health and safety plan come first. Written 21 November 2026 by Kindly Made from the sources linked above.